ARC-1886-xNxI

Back To Shop Starting Price: $2,000.00 The ARC-1886-xNxI presents the advanced hardware RAID technology in enhanced performance of using 6 Bays M.2 NVMe and an improved enterprise data protection of using two SAS/SATA ports. The hardware RAID adapter accesses the data of NVMe disk array with a workload preset value. While the workload level stays within the preset value, the RAID adapter would constantly back up the data of NVMe disk array to the other two SAS/SATA ports hard disk arrays. This is designed in a 1.6 GHz dual-core ROC processor, DDR4-2666 memory and PCIe Gen 4.0 host/device interface and supports RAID levels 0, 1, 10, 3, 5, 6, Single Disk or JBOD. READ MORE This is an Alert Note: Adding color to TALINO Chassis will cost an extra $400 and have a one-month additional lead time. Exact color may vary. $ SSD STORAGE *Do you want to add Solid State Drives for EVIDENCE/Case files which increase the speed and performance of RECON LAB? No independent evidence/data drives 4 x 512GB Solid State Drives [+$650.00] 6 x 512GB Solid State Drives [+$975.00] 4 x 1TB Solid State Drives [+$1,250.00] 6 x 1TB Solid State Drives [+$1,839.00] 4 x 2TB Solid State Drives [+$2,225.00] 6 x 2TB Solid State Drives [+$3,339.00] Thunderbolt 3 Desktop Storage (ARC-8050T3-6M) quantity Add to cartOnline Purchases and Pricing are for the US only. For International Purchases and Support Please Contact Us. Image represented in photograph is stock; customizations will render each system unique.

PRODUCT DESCRIPTION

Product Highlights:

• Controller-level hardware encryption
• SED support for encryption capable drives
• Support up to 256 SATA or SAS devices using SAS expanders
• Firmware automatically backup from NVMe RAID to SAS/SATA RAID
• Device interface PCIe Gen4 NVMe / 6Gb/s SATA per M.2 slot
• PCIe 4.0 host interface, PCIe Gen4 x8 lanes at maximum transfer rate up to 128Gb/s
• Supports ip to 4/6 x PCIe Gen 4.0 M.2 slots and 1x SFF-8654 [x8] / 2 SATA connector
• CBM module or on-board battery (CR2032) to keep on M.2 fault LED status for troubleshooting
• Hardware-based RAID solution that supports RAID levels 0,1, 10,3,5,6 Single Disk and JBOD
• Implemented *GB 72-bit DDR4-2666 SDRAM providing hardware RAID assist engine for parity calculations
• Dynamically allocate storage 12Gb/s SAS/SATA/PCIe (NVMe) to NVMe slot1 and SATA/SAS ports on ARC-1886-6N2I
• Support off module power loss protection (PLP) saves data issued without data loss at power fail using optional CBM module

PRODUCT COMPARISON

	ARC-1886-6N2I	ARC-1886-4N8I	ARC-1886-4X8I	ARC-1886-4X12
Form Factor	107.2(H) x 262(L) mm		107.2(H) x 205(L) mm
I/O Processor	Tri-Mode Dual Core ARM A15 1.6GHz ROC
On-Board Cache	8GB on-board DDR4-2666 SDRAM
Physical Dimensions	Low Profile: 167.65(L) x 64.4(H) mm
Drive Connector	2 x SATA & 6 x M.2 Connector	1 x SFF-8654 [X8] & 4 x M.2 Connector	1 x SFF-8654 [x8] 1 x SFF-8644 [x4]	2 x SFF-8654 [x8] 1 x SFF-8644 [x4]
Drive Support	12Gb/s SAS, 6Gb/s SATA, Gen 4.0 PCIe (NVMe)		Up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA HDDs/SSDs, using 12Gb/s SAS expander up to 32 NVMe drives through the PCIe switches
Management Port	In-Band: PCIe / Out-of-Band: LAN Port
Enclosure Ready	SGPIO, SMP, SES2 and UBM
Operating Voltage	12V
Power Consumption	Approximately 14 Watts (without M.2 drive)		Approximately 14 Watts
Operating Temperature	0 °C to 60 °C
Operating Humidity	10% to 85%, non-condensing
Cache Protection	ARC-1886-CBM